As you would expect, from our
extensive stock of materials, we can offer an impressive range of
reception shutters ideally suitable for projects such as kiosks,
serveries and of course receptions where vision is sometimes a necessity.
Our range of reception shutters are extremely appealing on the eye
and outclass other systems with their strength and smart appearance.
Unlike most of our competitors, we can (if necessary) offer our
reception shutters in small lath profiles thus reducing the shutter
box sizes dramatically while still retaining high levels of security.
Our lath profiles consist of
either steel or thick aluminium in solid, perforated or punched
sections. The open lath (perforated/punched) allow vision, light
and air filtration. On some profiles we can offer our reception
shutters with added higher security features of thicker lath profiles
and deeper sections of guide channels.
As an optional extra the aluminium
perforated or punched laths can be protected with inserted lexan
(glazed) strips for 'anti-tamper' maximum security.
All our reception shutters are
custom made to our customers unique requirements and are available
in a polyester powder coated finish to any of our stocked standard
BS or RAL colours.
Operation is by one of the following
- Single Phase Tubular Motors 240V, Rod Crank or Spring Assisted.
All motors are supplied by Ellard,
a world leader in shutter automation.
Check below for the full specification.
Curtain Options
38mm aluminium (solid, punched
& perforated).
55mm aluminium (solid only).
77mm aluminium (solid & punched).
75mm galvanised steel (solid & perforated).
Shutter Housing
Constructed from 20swg galvanised steel sheet metal or roll formed
aluminium in two sections - base and box lid. Box Lid is removable
for installation and maintenance purposes.
Barrel
Constructed from 102mm mild steel tube or rigid 60mm/70mm octagonal
tube. Incorporating either tubular motor or spring assembly with
roller bearing non-drive end.
End
Plates
Die-cast aluminium or steel formed to suit shutter weight and box
housing.
Side Guides
Constructed from 50mm/65mm galvanised steel or 60mm/70mm/75mm extruded
aluminium with an internal box section for strength and ease of
installation complete with nylon brush seals for smooth operation.
Operation
Operation is dependent upon
shutter size - by either manual spring assist or electric 240v single
phase tubular motor.
Electrical
Operation
Single phase powered by Ellard tubular motors, 240 volts with 0.5
> 2.5 amps of draw defendant upon shutter size.
Locking
Options
With spring assisted shutters either a centre lock, bullet lock
or shoot bolt arrangement is used. For electric shutters, our unique
drive down autolock is fitted as standard.
Installation
Installation is carried out by our own fully trained fitting teams.
Safety
Regulation
To comply with the supply of machinery (safety) regulations 1992.
All powered shutters are CE Marked.
Electrical Optional
Extras
Emergency manual override systems, battery back up units, key switches,
key pads, remote controls and photo cells.
Finish Options
Shutters can be powder coated
to any B.S. or R.A.L. colours you may require to compliment modern
building designs.
