Built In Shutters
This modern built-in system offers high
levels of security by night, yet disappears during the day. With
the shutter housing and guides designed to fit unobtrusively into
the wall, the system is not visible when not in use - and the
architectural look and design of the new buildings remains unspoilt.
As a leading manufacturer and supplier
of roller shutters, A1S is ideally positioned to provide built-in
systems for a wide range of applications including commercial
developments, offices, schools, medical centres and factory units
- complete with a nationwide service, superb after-sales support
and 12 month guarantee.
Architectural Insight
The A1S range of built-in shutters has
been designed to provide an effective, yet aesthetically pleasing
solution to the problems of burglary and vandalism in Britain
today.
The modern built-in system offers high
levels of security by night, yet disappears during the day. With
the shutter housing and guides designed to fit unobtrusively into
the wall, the system is not visible when not in use and the architectural
look and design of new buildings remains unspoilt.
With the development of this system and
its increasing popularity among architects and their clients,
it surely heralds the end of the unsightly traditional shutter,
once so common on commercial developments, offices, schools, medical
centres and factory units.
As one of the UK's leading manufacturers
and suppliers of roller shutters, A1S are ideally positioned to
provide quality built-in systems for a wide range of applications.
Check below for the full specification.
Shutter Housing
The shutter housing is of PVC honeycomb
construction for strength and maximum insulation. This modular
system has die-cast aluminium plates to carry the weight required
for each shutter. The internal fascia panel is attached by a snug
fit clip design for draught proofing.
Guide Channel
Constructed from extruded aluminium with
an internal box section for strength and installation complete
with nylon brush seals for smooth operation.
Shutter Curtain
38mm double skin extruded aluminium non-vented
lath with lateral movement contained by nylon ends with a bottom
rail and weather seal to suit. Alternatively vented or non-vented
foam filled lath can be used.
Electrical Operation
The operation is by one of the following
- Single Phase Tubular Motors 240V, Rod Crank or Spring Assisted.
All motors are supplied by Ellard, a world
leader in shutter automation.
Electrical Optional Extras
Key Switch, Rocker Switch, Key Pad, Remote Control, Group Commands.
